Kenmore Dryer F01 Error Code

Experiencing a Kenmore Dryer F01 error code? The F01 error may lead to inconsistent drying, heat level issues, or clothes not drying correctly. To troubleshoot, unplug the dryer, inspect and test the thermistor, or consider replacing it. If needed, replacing the control board is essential, located above the dryer drum's left side wall. Professional repair options are available, with costs averaging $461. To prevent the F01 error, maintain the lint-trap area, electric plug connections, and door switch. Seek expert advice for thorough inspection and soldering solutions. Resolve the F01 error effectively with these tips.

Key Takeaways

  • F01 error due to main relay power control board malfunction.
  • DIY troubleshooting involves checking thermistor and continuity testing.
  • Professional repair services offer efficient diagnosis and control board replacement.
  • Regular maintenance prevents F01 errors.
  • Address loose connections with soldering iron for DIY fixes.

Symptoms of Kenmore Dryer F01 Error

Experiencing the Kenmore Dryer F01 error may result in inconsistent drying cycles due to a vital malfunctioning thermistor. The F01 error code, specific to Kenmore dryers, indicates a faulty thermistor responsible for regulating temperature control.

When this essential component malfunctions, the dryer may exhibit erratic behavior in maintaining the desired heat levels during the drying process. This can lead to clothes not drying properly or the dryer running at incorrect temperatures. The thermistor's location near the exhaust system allows it to monitor and adjust the internal temperature accordingly.

To resolve the F01 error and restore proper functionality, diagnosing and replacing the defective thermistor is necessary. Ensuring the successful replacement will guarantee the dryer's temperature control operates effectively moving forward.

DIY Troubleshooting Steps for F01 Code

To troubleshoot the F01 error code on a Kenmore dryer, start by locating the essential thermistor near the exhaust and inspecting for any issues. The thermistor plays a vital role in temperature control within the dryer. Here is a table to help guide you through the troubleshooting process:

Steps to Troubleshoot F01 Code
1. Unplug the dryer for a minute
2. Check the thermistor for any visible damage
3. Test the thermistor for continuity
4. Replace the thermistor if necessary
5. Monitor the dryer for further errors

Following these steps can aid in identifying and resolving the F01 error, ensuring the efficient operation of your Kenmore dryer.

Replacing Kenmore Dryer Control Board

Replacing the Kenmore Dryer control board involves accessing and replacing the main relay power control unit located above the dryer drum on the left side wall. To access the control board, pull the dryer forward, unplug it, and unscrew the top panel.

The control board is vital for resolving the F01 error code and restoring the functionality of the dryer. Typically, the cost of a new control board averages around $250. This repair is essential in addressing the main relay power control board failure indicated by the F01 error code.

It's a fundamental aspect of appliance repair to guarantee the proper functioning of the dryer and eliminate the error message.

Professional Repair Options for F01 Error

For efficient resolution of the F01 error on Kenmore dryers, exploring professional repair options is advisable. When facing this error code, seeking professional repair services can be beneficial. Trained technicians have the expertise to diagnose and repair issues related to the control board efficiently.

Professional repair estimates for fixing the F01 error typically range around $461, but DIY repair with replacement control boards costing between $65 to $200 can also be cost-effective. If initial DIY attempts don't rectify the F01 error, professional help is recommended to guarantee a proper diagnosis and repair.

Relying on experienced professionals for repairing F01 errors on Kenmore dryers can provide reliable and effective solutions.

Common Causes of F01 Error Code

An essential factor contributing to the F01 error code on Kenmore dryers is the malfunction of the main relay power control board. When this control board becomes faulty, it can disrupt the communication between the different components of the dryer, leading to the F01 error.

The main relay, responsible for sending power to the heating element and motor, plays a vital role in the dryer's operation. If this relay malfunctions, it can trigger the F01 error and prevent the dryer from functioning properly.

To address this issue, a control board replacement is often required, and it's recommended to seek professional repair services for this task to ensure proper installation and functionality.

Preventing F01 Error in Kenmore Dryer

Regularly inspecting and maintaining key components like the lint-trap area, electric plug connections, door switch, thermal cut-off switch, and control board can help prevent the F01 error in Kenmore dryers.

Clean the lint-trap area frequently to avoid blockages that may trigger the error.

Check and secure electric plug connections to guarantee proper electrical contact and prevent issues like F01.

Verify the functionality of the door switch to uphold smooth dryer operation and ward off the F01 error.

Regularly monitor the thermal cut-off switch for any signs of malfunction to prevent error occurrences.

Additionally, inspect the control board for any anomalies and address them promptly to maintain peak dryer performance and prevent F01 error disruptions.

Expert Advice on Resolving F01 Error

One effective method for resolving the F01 error on a Kenmore dryer is to thoroughly inspect and troubleshoot key components like the thermistor and solder points. The thermistor plays an important role in regulating the dryer's temperature, so ensuring its proper functioning is vital.

Using a soldering iron to address any loose or damaged connections on the control board can often rectify the error. DIY fixes like re-soldering worn-out relay connections can prove successful in resolving the F01 issue.

Frequently Asked Questions

How Do I Fix F01 Error?

To fix the F01 error, follow these steps: troubleshoot for faulty parts, diagnose the issue accurately, and try DIY fixes. Common causes include faulty thermistors and control boards. Consider professional repair for complex issues.

What Does F1 Code Mean on a Kenmore Dryer?

The F1 code on a Kenmore dryer typically signifies a faulty thermistor related to temperature control. Troubleshooting steps involve checking the thermistor and ensuring proper airflow. DIY repairs like resetting the error code can help, but professional assistance may be necessary.

What Is Error 01 on Kenmore Dryer?

Error 01 on a Kenmore dryer typically points to a faulty thermistor. Troubleshooting steps involve checking control board solder points and ensuring proper airflow. Common causes include temperature control issues. Preventative maintenance includes regular cleaning and maintenance checks.

How Do I Reset My Kenmore Dryer?

When troubleshooting my dryer, I reset it by holding Start and Cancel buttons for 15 seconds. If the issue persists, I unplug it for a minute and then plug it back in. Regular maintenance can prevent common dryer problems.


To sum up, the Kenmore Dryer F01 error code can be a frustrating issue to deal with, but with the right troubleshooting steps and possibly replacing the control board, you can resolve the problem.

If DIY methods don't work, consider seeking professional repair options.

By understanding the common causes of the F01 error and taking preventative measures, you can keep your Kenmore Dryer running smoothly and efficiently.

Remember to seek expert advice if needed for a quick resolution.